You can hire a deck construction company to build your dream deck, but how do you take care of it to keep it looking nice? Performing basic maintenance and upkeep on your structure will keep it looking and functioning great for much longer than if you just let it sit there. Here are some tips to get you started.Repairs
Each year, check the supporting posts and joists underneath that hold the deck up, as well as the screws and bolts that connect it to your home. Inspect for wood rot, structural damage, or loose bolts and screws. Also check the railings and flooring for loose nails or screws, as well as damaged wood and splinters. If you find any problems, make sure and correct them before doing any further maintenance. This may be as simple as tightening bolts and hammering nails back in or as complicated as replacing posts. If you find wood rot on your supporting posts, it is best to give your deck construction company a call. These types of problems often require major renovations and are best left to the professionals.
SandingIf your deck is older and looks beaten up, consider sanding rather than washing it. Sanding an older structure can give it new life and add another 10 years to it. Before sanding, make sure all nails and screws are sunk into the wood so they don’t catch on the drum sander. Sand diagonally first with sandpaper that is 40-50 grit, then go back and sand it again horizontally using 70-80 grit sandpaper. This process evens out the surface while opening up the pores of the wood.Homemade Cleaning SolutionHere’s a recipe for an effective deck cleaning solution that you can make at home. Combine one quart of household bleach with 1/3 cup of powdered laundry soap and 3 quarts of warm water. Apply and rinse off.StainingStarting at an inner corner, use a sprayer to apply semi transparent stain. Watch for overspray on siding or any other surfaces nearby. Go over any puddles with a roller to even out the finish. Don’t let the stain completely dry before applying a second coat because it will not soak into the wood. Not all structures will require more than one coat. Use a stain that has a high amount of resin in it so it will last longer. Look for solids at or above the 50 percent level. In the years between staining your deck, a water sealant can be applied to protect the wood.
Ask your deck construction company about installing low-maintenance decking if you prefer to avoid frequent upkeep and repairs. These kinds of decking materials are stain, scratch, mold, mildew, and split resistant.